Monday 27 October 2014

Steps of Timber Decking And Its Beauty



Among all people who know about timber decking, the homeowners have shown more interest in it. They are happy to invest in this item because it does not cost much, and it is easy to install. In fact, timber decking witnessed an increased interest from the home owners especially after the DIY methods were introduced. A well-designed deck can increase the usable space in your garden, and it will be aesthetically pleasing. If you search online with timber decking in Melbourne, you will find so many different ideas of timber decking and how to go about doing it in an easy way. 


As said earlier, the introduction of DIY methods has made life easier for people. If you want to do it on your own, you will have to start by preparing the space on the floor in the garden where you want to construct a deck. You will have to calculate and find the right space because otherwise the whole structure may look odd. The next step will be to get rid of the weeds and plants that have grown in that space. There should not be any rocks or obstructive elements near the surface. The third step involves placing the weed membrane fabric down so that no further plant will grow in that particular space. People often miss this part and after a few days they again have to take the weeds out from underneath the deck. Moreover, it leads to the growth of moulds as well. You can secure the space by installing steel ground hooks. 

Collecting the timber for the deck is probably one of the most arduous tasks that you will have to go through. This is because you should acquire the wood ethically. Many manufacturers have a tendency to buy them from the local people who do not have a license to sell these products. So, always check if your supplier is genuine or not. Furthermore, you need to check the quality of the timber as well. Scandinavian Pine should be avoided because they are made of softwood. However, you can also choose from the Balau Hardwood. They are better than the Scandinavian Pine, and the size will vary from 9 cm to 15 cm with 12 cm being the common size. Most of the timber will be grooved from both sides, and this makes it easier for you to install. 

Once you have acquired the timber, almost half of the work will be completed. It will be time to assemble and join the frames together. C16 timbers are the most common and can be used with a metal post anchors in many cases. Try to have the subframes handy because they will help in keeping the big timbers in place. Fixing them together will make the deck stronger and long lasting. It would be wise to keep a gap of 0.6 cm between each board. 

This will allow the wood to expand and contract during the respective seasons. You can also install a handrail if you want and for that you will have to use metal spikes to hold the vertical posts in place. A few finishing touches here and there and the timber deck will be structured. For more information on timber decking, you can visit the website of Barry's Carpentry Service, which is a renowned name in the field of providing the timber decking solutions. 

0 comments:

Post a Comment